Tsugami America
Swiss Lathes
Known worldwide for fast, reliable and precise Swiss (sliding headstock) lathes, Tsugami also manufactures top-quality multifunction machines, opposed gang-tooled lathes, and machining centers. It is the world's leading builder of small parts turning solutions, for parts up to 38mm in diameter.
Precision Tsugami Corporation has been a technology partner of Morris Group, Inc. since 1978 when it assigned exclusive North American importing rights to Tsugami America, a division of Morris Group, Inc.
Opposed Gang Tool CNC Lathes
7mm
B075-III Swiss Type CNC Lathe
A 7mm, 5-axis Opposed Gang Tool Lathe, the B075-III is built on the same framework of the B0125-III, but includes micromachining with higher spindle rpm. The B075-II also has back spindle capabilities along the Z2-axis and can eliminate some secondary operations. This machine is convertible and can run as a traditional sliding headstock machine by using the guide bushing or use without and a chucker kit. Use this machine to make parts smaller than 3:1L/D ration in chucker mode.
MORE INFO »
12mm
B0125-VR Swiss Type CNC Lathe
A 12mm, 5-axis Opposed Gang Tool CNC Lathe, the B0125-VR capable of front and back spindle simultaneous machining to reduce cycle time, gang tool post, rigid cast iron frame, 12,000rpm main and sub-spindle, and a total of 21 tool positions. 9 OD and 12 fixed tool positions for 5-axis machining. This machine is perfect for making parts smaller than 3:1 L/D ratio in chucker mode. When you run this machine in chucker mode the turning center can use drawn bar stock instead of centerless ground stock reducing remnant size and increasing shop flexibility.
MORE INFO »
B0126-VR Swiss Type CNC Lathe
A 12mm, 6-axis Opposed Gang Tool CNC Lathe, the B0126-VR is a convertible Swiss machine that adds Y2-axis capability to the back tool post for additional flexibility, and there are 27 tool positions. To reduce cycle time, this machine allows back milling operations to overlap machining operations. Built in a small footprint, the B0126-VR comes with Tsugami's gang type tool post, rigid cast iron frame, and 12,000RPM main and sub spindles. Also, a convertible machine, it can be run as a traditional sliding headstock Swiss Turn Lathe using the guide bushing or as a chucker.
MORE INFO »
20mm
B0205-VR Swiss Type CNC Lathe
A 20mm, 5-axis Opposed Gang Tool CNC lathe, the B0205-VR adds an independent back tool post and an optional two rotary tool positions on the backpost for front and back spindle simultaneous machining. The B0205-VR includes the Tsugami gang type tool post, cast iron frame, a 10,000 rpm main and 12,000 rpm sub spindle, and 21 tool positions -9 OD and 12 fixed for flexible machining. This is also a convertible machine that can run as a traditional sliding headstock Swiss type automatic lathe with a guide bushing or a chucker kit for running without the guide bushing.
MORE INFO »
S205-II Swiss Type CNC Lathe
A 20mm, 5-axis Opposed Gang Tool Swiss Type CNC Lathe, the S205-II can be used for a multiple volume productions featuring up to 16 different cartridge-type live tools. With a direct drive rotary guide busing it is built to provide accurate, high-speed machining, and there is also the capability of simultaneous machining using the main or back spindle. This is also a convertible machine that can run as a traditional sliding headstock Swiss type automatic lathe with a guide bushing or a chucker kit for running without the guide bushing.
MORE INFO »
B0206-VR Swiss Type CNC Lathe
A 20mm, 6-axis Opposed Gang Tool CNC Lathe, the B0206-VR has Y2 axis capability on the back tool post for additional flexibility, and there are 27 tool positions. This allows back milling operations to be overlapped with the machining on the main spindle to reduce cycle times. The B0206-VR includes Tsugami's gang type tool post, cast iron frame, 10,000 rpm main, and 12,000 rpm sub spindle. and it is all in a compact footprint. This is also a convertible machine that can run as a traditional sliding headstock Swiss type automatic lathe with a guide bushing or a chucker kit for running without the guide bushing.
MORE INFO »
S206-II Swiss Type CNC Lathe
A 20mm, 6-axis Opposed Gang Tool CNC Lathe, the S206-II can feature up to 24 different live tools with a modular tooling layout to create rapid changeover times. Featuring a Y-axis tool post that allows complex parts to be machining on the main and back spindle at the same time.
MORE INFO »
32mm
B0325-III Swiss Type CNC Lathe
A 32mm, 5-axis Swiss Type Lathe is the base model in the B0 series. This machine comes with a 4-spindle cross rotary tool on the front tool post and a deep hole drill holder, capable of up to 140mm length, is next to the sub-spindle. This machine includes the Tsugami gang type tool post, rigid cast iron frame, 8,000 RPM main spindle, and 27 tool positions. This is also a convertible machine that can run as a traditional sliding headstock Swiss type automatic lathe with a guide bushing or a chucker kit for running without the guide bushing at an economical price.
MORE INFO »
B0326-III Swiss Type CNC Lathe
A 32mm, 6-axis Opposed Gang Tool CNC Swiss Type Lathe Lathe that can convert from direct-drive guide bushing barfed operation to non-guide bushing operation with the chucker kit. This machine is perfect for rough or prismatic parts with is 8,000 RPM spindle. The B0326-III has modular live tooling for quick changeovers and a tool zone that you can access easily. The machine has 29 tool positions, and 15 live tool positions, and 8 live backworking tools, simultaneous operation on the main and sub-spindle and cycle times are reduced drastically.
MORE INFO »
38mm
B0386-III Swiss Type CNC Lathe
A 38mm, 6-axis, Opposed Gang Tool CNC Lathe that can perform heavy cuts on its rigid platform including large linear guides, a 3-toggle clamping system, and extra ribbing under the spindles. With 8-stations it allows for driven back working for maximum capabilities and a power horsepower milling spindle motors for cross milling and drilling features. This machine works well with the Abile Programming Software for the toughest of applications. With a Max Headstock Stroke with guide bushing of 320 mm / 12.6" and without guide bushing of 70mm / 2.75". The B0386-II has 29 tools, and 15 live tools standard with a live tool speed of 6,000 RPM/
MORE INFO »
Swiss Turn Lathes w/ B-Axis
20mm
SS207-II-5AX Sliding Headstock
A 20mm, B-axis Sliding Headstock Swiss Type Lathe, and is the ultimate swiss turn for complex small parts to perform continuous live cutting on a Servo-driven B-axis. The SS207-II-5AX can have three front and three rear on the B-axis and coordinate them with the C-axis for precise angles and contours. Capable of drilling, tapping, and end milling at any angle with 37 tool positions, 13 live tool positions, and a live tool speed of 8,000 rpm.
MORE INFO »
SS20MH-III-5AX Sliding Headstock
The Tsugami SS20MH-III-5AX makes it possible to machine the most complex-shaped parts from barstock, and corresponds to heavy-duty cutting by using the CAPTO C3 dual contact holder. This extremely versatile machine weighs in at 11,660 lbs and is equipped with a 25,000 rpm B-axis tool spindle with a 30-tool magazine, and 6 live tool positions on the subside Y-axis for optimum allocation of machining capability.
MORE INFO »
32mm
SS327-III-5AX 32mm
A 32mm, B-axis sliding headstock swiss type lathe, for complex-shaped parts. The SS327-5AX is a Servo-driven B-axis to cut complex parts in a single setup. The B-axis has four front and four rear live tools that can machine with the C-axis for precise angle cutting and contours. Capable of drilling, tapping, and end milling at any angle. The SS327-5ax is the ultimate Swiss type lathe that can cut multiple angles with the same tool so it decreases the number of tools required. This machine has a max headstock stroke with guide bushing of 320 mm / 12.59" and without a guide bushing of 70mm / 2.74", and 38 tool positions, and 16 live tool positions and a live tool speed of 5,000 rpm (B-axis tools), and 6,000 rpm on the other.
MORE INFO »
38mm
SS38MH-5AX Sliding Headstock
A 38mm, chucker-convertible sliding headstock lathe with B-axis, has full 5-axis simultaneous machining for high accuracy and heavy-duty cutting. This machine is the first Tsugami of it's kind and it is unique with the capability of backworking overlap with live tools to allow more than one tool in the cut to reduce your cycle times. With extreme versatility with 52 tools, a 40 tool magazine, 10 tools on the back tool post, and an optional 2 tools on the deep hold drill holder. The SS38MH-5Ax has a live tool speed of 6,000 rpm on backworking, and 20,000 RPM on the tool spindle.
MORE INFO »
Independent Gang Slide Swiss Type Lathe
12mm
BW129Z 12mm 9-axis Swiss Type CNC Automatic Lathe
A 12mm, split-side automatic lathe that has dual spindles and dual gang slides to reduce your cycle times on your complex parts. Capable of simultaneous and/or overlapping Swiss operations with its multiple driven tools on the main and sub-spindle along with front and rear sliding tool posts. The BW129Z has cross rotary tools on the same centerline for pinch milling or drilling can save you time as well. With a Max Headstock Stroke with guide bushing of 210mm /8.27", without guide bushing of 45mm /1.77", 28 tool positions, and 9 live tool positions standard this machine is perfect for your complex parts.
MORE INFO »
20mm
BW209Z 20mm 9-axis Swiss Type CNC Automatic Lathe
A 20mm, split-side automatic lathe with dual spindles and dual gang slides to reduce your cycle times on your complex parts. Capable of simultaneous and/or overlapping Swiss operations with its multiple driven tools on the main and sub-spindle along with front and rear sliding tool posts. The BW209Z has cross rotary tools on the same centerline for pinch milling or drilling can save you time as well. With a Max Headstock Stroke with guide bushing of 210mm / 8.27", without guide bushing max headstock stroke of 45mm / 1.77", 28 tool positions standard, and 9 live tool positions standard this machine is perfect for your complex parts.
MORE INFO »
32mm
BW329Z 32mm Spilt-Side CNC Preicsion Automatic Lathe
A 32mm, split-side automatic lathe with dual spindles and independent gang slides to reduce your cycle times on your complex parts. Capable of using 3 tools in the cut, with two on the main and one on the sub, the shortest tool to tool paths and quick chip to chip times. With 8 live tool positions on the sub spindle for milling operations on sub spindle instead of the main spindle. Will nine cutting axes (X1, Y1, Z1, X2, Y2, X3, Y3, and Z3) the BW329Z can handle the toughest applications and your complex parts.
MORE INFO »
Vertical Machining Centers
VA3S
The Tsugami VA3S vertical machining center features a 20,000 RPM spindle allowing for aggressive material removal to delicate surfacing. The 21-station tool magazine allows for 1.1 second tool-to-tool time. With FANUC’s AI Contour II, 200 block look ahead, accurate machine movements are fully optimized, leading to higher productivity. Conserve air and energy consumption when the machine is idle or in production using Tsugami Eco System.
MORE INFO »
Turn/Mill Turning Center
TMU1R 38mm Swiss Type Multitasking Turning Center
A 38mm multifunction turning center, the TMU1R is one of the most capable Swiss lathe/multitasking turning centers on the market today. With a 60-tool ATC (118 optional) and 16-station turret, the TMU1R is perfect for short runs of complex parts in a single set-up. The main and sub-spindle are identically powered with a 10,000rpm horizontal tool spindle on the B-axis with the horizontal tool spindle offering 210 degrees of position. The front and rear spindles have full C-axis capability. Main and back spindle speed of 6,000 RPM.
MORE INFO »
TMA8F 65mm, 5-axis Turn/Mill Multifunction Turning Center
The TMA8F is the ultimate compact, 65mm multi-tasking 7-axis turning/milling center capable of 5-axis simultaneous machining for your complex part machining. With a 60 tool magazine, glass scales on the X/Y/Z axis, standard touch probe, parts catcher, C-axis capability, and 8" chuck allows for large diameter parts and a quick collet change system can be changed for up to 2.5" bar work. Capable of CNC milling, drilling, tapping, comound angle work, turning, boring, and threading- all in a single set-up.
MORE INFO »
LaserSwiss CNC Lathe
12/20/32 mm CNC Precision Automatic Lathe with Laser Cutting & Laser Welding
The Tsugami LaserSwiss models include a variety of 12mm, 20mm, 32mm with three to seven axes to make up the world's leading LaserSwiss machines. They combine precise Swiss turning with a fully integrated laser cutting system to improve your part quality, minimize part handling, eliminate secondary operations, and accelerate production. All programming is through the CNC control including power, frequency, pulse width, gas pressure threshold, and lens focus point.
MORE INFO »
Turning Center with Y-Axis
MTC8SY
The MTC8SY is a turning center with a Y-axis capable of milling and turning that is made for a wide range of applications. Capable of turning, drilling, boring, cross-drilling, and milling. To minimize vibration and provide accel/decel the main and sub-spindle have built-in spindle motors. The 12-position turret that is mounted to the Y-axis allows users to mount driven tooling at any turret position on the main or sub-spindle. The MTC8SY is an extremely reliable and flexible machine that will be able to be in your shop for years to come. The X and Y is built with a massive box way construction allowing for rigidity and dampening for heavy cuts, and a Z slide that is comprised of heavy-duty linear roller guideways for speed.
MORE INFO »